ZigBee Wireless Date Transmission Equipment (iDM-PA Series)

The traditional method of monitoring equipment is through wired communication, but the disadvantage is complex wiring and limited transmission distance. The wireless monitoring solution, ZigBee network center receives commands via RS485 or RS232 data frame from the host machine, and then through the way of multicast pass command data frame of the individual ZigBee collector of ZigBee wireless network, finally passes the data to the terminal by RS485 and RS232 port terminal equipment. Each data frame ZigBee collector will transfer the data to the ZigBee network node which comes from its RS485 or RS232 port, through point to point mode, the central node returns the data to the host computer through the RS485 or RS232. ZigBee wireless communication technology is introduced into the application of the monitoring system to realize wireless data acquisition and to a certain extent solve the problem of wiring difficulty and poor adaptability of cable system.

ZigBee Wireless Date Transmission Equipment (iDM-PA Series)
● Realization of transparent transmission, easy operation, simple configuration, stable transmission
● Support network and CAN communication mode, standard network interface with RS485, RS232,is RJ45
● There are two output forms for serial communication interface (RS485 + CAN or only RS232)
● Working state indicating led can directly reflect the power supply, communication, failure of ZigBee wireless data transmission equipment
● Support all ZigBee communication channel, the transmitted power can be set up
● Support parameter settings, page setup, remote upgrade, of MODBUS RS485, TCP/IP mode etc

Model

iDM-PA15E

iDM-PA25E

iDM-DC


Name

ZigBee wireless 

data transmission 

equipment

ZigBee wireless 

data transmission 

equipment

ZigBee wireless 

data acquisition 

equipment

Communication Interface

RS232,RJ45

RS485,RJ45

RS485,RJ45

Transmit Power

18dBm (settable)

Receiver Sensitivity

-97dBm

Wireless frequency

2.4GHz ISM Global free band

Band

2405-2480MHz

Number of channels

16

The maximum packet

99 Byte

Transmission Distance

550m (No obstruction)

Network topology

Mesh network

Network interface

10/100Mbps adaptive fast Ethernet

Network ID

65535 can be specified 

Serial interface 

RS232/RS485, asynchronous, half duplex

Serial port baud rate

2400bps 115200bps, (settable)

Protocol format

Support MODBUS RTU mode

LED indicator


Yellow LED£Green LED£Red LED£

Input power (DC)

8V-15V

Peak current

160mA

Power consumption

Maximum 1.8W

Operating environment

Temperature:0℃-70℃, Environmental relative humidity: 10~ 80%

Software Upgrade 

Support network upgrade , serial port upgrade

Product size and packaging

Long 100mm; Wide 66mm; High 27mm;

Products include (built-in)

1 x 2.4 GHz short antenna; Vehicle sucker antenna (optional); 1x power adapter

Download

ZigBee Wireless Date Transmission Equipment (iDM-PA Series) Datasheet - PDF




 
Online Support